Cobra ESC Programming Card
$8.99
Description
The Programming Card is very easy to use, you simply set the six programming jumpers to the desired settings, and plug the programming card into the control lead on your ESC. Then, with a motor connected to the ESC, plug in the motor battery and wait a couple seconds. After you hear the confirmation tone, unplug the battery and the programming is complete! To complete the process, unplug the Programming Card for the ESC, and plug the control lead back into the throttle channel on your radio receiver.
NOTE: The Cobra Programming Card is only for use with the Aircraft Versions of Cobra Speed Controllers. These can easily be identified by a green stripe down the center of the label, and have part numbers that start with “DL”. This program card does not work with the Cobra Multirotor Speed Controllers. These can easily be identified by an all black label, and part numbers that start with “MR”.
Additional information
Weight | 0.1 lbs |
---|---|
Dimensions | 2 × 2 × 0.1 in |
Product Brand | Cobra Brushless Motors |
Manufacturer |